Tire Manufacturing Equipment Segmented Mold Containers Features of the RMS Segmented Mold Container : Unique heat transfer system provides uniform tire curing temperature Accurate mold alignment in the container Minimal deflection of actuator ring under press squeeze & internal steam/water pressure Top plate position controlled during tire loading Precise slide block & tread alignment Minimal heat loss during & between cure cycles Maximum contact between slide block & actuator ring in all positions Segmented Mold Container Size Specifications Note: Other sizes available upon request Size Container Mold Details Outside  Diameter Height Segment Travel Weight Outside Diameter Height Tread  Width Height Vertical Horizontal   40.5 (inch) 40.25 13.75 6.53 1.75 2700LBS 30.906 11.810 8.26 (mm) 1022.4 349.3 165.9 44.5 1227.3Kg 785.0 300.0 209.8 43 (inch)  43.13 14.75 6.53 1.75 3000LBS 32.700 12.812 9.00 (mm) 1095.5 374.7 165.9 44.5 1363.6Kg 830.6 325.4 228.6 46.5 (inch) 45.75 16.13 6.53 1.75 3350LBS 34.100 14.000 10.00 (mm) 1162.1 409.6 165.9 44.5 1522.7Kg 866.1 355.6 254.0 43x17 (inch) 43.13 17.00  6.53 1.75 3100LBS 32.000 15.062 11.25 (mm) 1095.5  431.8  165.9 44.5  1409.1Kg  812.8  382.6  285.8 48x20 (inch) 47.75 20.00 8.40  2.25  4650LBS 35.000  17.500  13.50 (mm) 1212.9 508.0 213.4 57.2 2113.6Kg  889.0  444.5 342.9 44x18 (inch) 44.00 18.00  8.40  2.25 3530LBS  32.500  15.500 13.00 (mm) 1117.6 457.2 213.4 57.2  1604.5Kg  825.5 393.7 330.2 44x19 (inch) 44.00 19.00 8.40  2.25 4250LBS 32.500 16.500 13.50 (mm) 1117.6 482.6 213.4  57.2  1931.8Kg 825.5 419.1 342.9 44x21 (inch) 44.00 21.00 8.40 2.25 4500LBS 32.500  19.000 16.00 (mm) 1117.6 533.4 213.4 57.2  2045.5Kg 825.5 482.6 406.4 Return to Product Selection.

RMS Equipment Company P.O. Box 9001 105 Glasgow St. Kitchener, Ontario, N2G 4J4 CANADA Tel: (519) 749-4634 Fax: (519) 749-4613 E-mail: rmssales@rmsequip.com
Member of The Pettibone Tire Equipment Group